NAL Z Drive Units

- Models
- 1
- Rolls
- 4
- Size range
- 0.6–15 mm
- In inches
- 0.024–0.591 in
Series overview
NAL Z drive units feed with transport belts and can clamp the material centrically or non-centrically. The NAL 160 Z covers 0.6–15 mm, takes material up to 75 mm wide and gives about 2.5 kN of transport force at 180 Nm input torque, for coated or uncoated soft materials as well as high-strength wire and strip.
- Materials
- Wire
- Tube
- Strip
- Cable
- Profile
- Capabilities
- Adjustable rolls
Shared across the series
- Transport belts with centric or non-centric clamping
- Material up to 75 mm wide
- About 2.5 kN transport force at 180 Nm
- Adjustable support arms
How to choose a model
A few checks narrow the NAL Z models below to the ones worth quoting.
- Reading the dimensions
- The Dimensions column lists the size range, meaning the diameter or thickness of the material, that each model is specified for. For example, NAL 160 Z covers 0.6–15.0 mm (0.024–0.591 in).
- Match the material
- Every NAL Z model is listed for wire, tube, strip, cable and profile, so material does not separate models within this series. Use size and roll count to narrow the choice.
- Match the size
- Pick the model whose range contains the diameter or thickness of your material. The NAL Z series spans 0.6–15 mm (0.024–0.591 in) in total. If your size sits on the boundary between two models, ask us which suits your material better.
Tolerance and line speed also affect the right choice. Send your material, size, tolerance and line speed with your quote request and we will confirm the model with Witels-Albert.
Models in this series
Compare dimension ranges and processing capabilities, then add the models you need to a quote request.
| Model | Dimensions | Materials | Capabilities | Request a quote |
|---|---|---|---|---|
| NAL 160 Z 0.6–15.0 mm0.024–0.591 in Wire, Tube, Strip, Cable, Profile · Adjustable rolls | 0.6–15.0 mm0.024–0.591 in | Wire, Tube, Strip, Cable, Profile | Adjustable rolls |
Selection help
Not sure which model fits your line?
Send your material, diameter, and throughput. Our team in Branford, CT works with Witels-Albert in Germany to specify the right configuration.