Skip to content

NAK Z Drive Units

NAK Z drive units feed with transport belts and clamp the material centrically: a pneumatic cylinder moves each belt toward the material.
nakz drive unit
Fig. 1 nakz drive unit
Models
2
Rolls
4
Size range
0.6–40 mm
In inches
0.024–1.57 in

Series overview

NAK Z drive units feed with transport belts and clamp the material centrically: a pneumatic cylinder moves each belt toward the material. NAK 60 Z covers 0.6–15 mm with 0.5 kN of transport force and NAK 160 Z covers 0.6–40 mm with 2.5 kN; both are supplied with or without an actuator.

Materials
  • Wire
  • Tube
  • Strip
  • Cable
  • Profile
Capabilities
  • Adjustable rolls

Datasheet

Full technical specifications for every NAK Z model in a single PDF.

Download datasheet

Shared across the series

  • Transport belts with centric clamping
  • A pneumatic cylinder clamps each belt
  • Transport force 0.5 kN (NAK 60 Z) or 2.5 kN (NAK 160 Z)
  • Supplied with or without actuator

How to choose a model

A few checks narrow the NAK Z models below to the ones worth quoting.

Reading the dimensions
The Dimensions column lists the size range, meaning the diameter or thickness of the material, that each model is specified for. For example, NAK 60 Z covers 0.6–15.0 mm (0.024–0.591 in).
Match the material
Every NAK Z model is listed for wire, tube, strip, cable and profile, so material does not separate models within this series. Use size and roll count to narrow the choice.
Match the size
Pick the model whose range contains the diameter or thickness of your material. The NAK Z series spans 0.6–40 mm (0.024–1.57 in) in total. If your size sits on the boundary between two models, ask us which suits your material better.

Tolerance and line speed also affect the right choice. Send your material, size, tolerance and line speed with your quote request and we will confirm the model with Witels-Albert.

Models in this series

Compare dimension ranges and processing capabilities, then add the models you need to a quote request.

NAK Z 4-roll models
ModelDimensionsMaterialsCapabilitiesRequest a quote
NAK 60 Z

0.6–15.0 mm0.024–0.591 in

Wire, Tube, Strip, Cable, Profile · Adjustable rolls

0.6–15.0 mm0.024–0.591 inWire, Tube, Strip, Cable, ProfileAdjustable rolls
NAK 160 Z

0.6–40.0 mm0.024–1.57 in

Wire, Tube, Strip, Cable, Profile · Adjustable rolls

0.6–40.0 mm0.024–1.57 inWire, Tube, Strip, Cable, ProfileAdjustable rolls

Selection help

Not sure which model fits your line?

Send your material, diameter, and throughput. Our team in Branford, CT works with Witels-Albert in Germany to specify the right configuration.