Skip to content

NA M Drive Units

NA M drive units are 2-roll wire feeders with an actuator: both transport rolls are driven, each has two grooves, and pneumatic actuators clamp the material.
na m drive unit
Fig. 1 na m drive unit
Models
1
Rolls
2
Size range
5–15 mm
In inches
0.197–0.591 in

Series overview

NA M drive units are 2-roll wire feeders with an actuator: both transport rolls are driven, each has two grooves, and pneumatic actuators clamp the material. The NA 120 M feeds wire and profile from 5 to 15 mm at 0.2 m/s (50 Hz) with 1.6 kN of transport force, for continuous rather than intermittent feed.

Materials
  • Wire
  • Profile
Capabilities
  • Adjustable rolls

Datasheet

Full technical specifications for every NA M model in a single PDF.

Download datasheet

Shared across the series

  • Two driven transport rolls, two grooves each
  • Pneumatic actuators clamp the material
  • Transport force 1.6 kN (friction coefficient 0.1)
  • Feed speed 0.2 m/s at 50 Hz
  • Factory-mounted motor and spur gearbox
  • For continuous feed, not intermittent feed

How to choose a model

A few checks narrow the NA M models below to the ones worth quoting.

Reading the dimensions
The Dimensions column lists the size range, meaning the diameter or thickness of the material, that each model is specified for. For example, NA 120 M covers 5.0–15.0 mm (0.197–0.591 in).
Match the material
Every NA M model is listed for wire and profile, so material does not separate models within this series. Use size and roll count to narrow the choice.
Match the size
Pick the model whose range contains the diameter or thickness of your material. The NA M series spans 5–15 mm (0.197–0.591 in) in total. If your size sits on the boundary between two models, ask us which suits your material better.

Tolerance and line speed also affect the right choice. Send your material, size, tolerance and line speed with your quote request and we will confirm the model with Witels-Albert.

Models in this series

Compare dimension ranges and processing capabilities, then add the models you need to a quote request.

NA M 2-roll models
ModelDimensionsMaterialsCapabilitiesRequest a quote
NA 120 M

5.0–15.0 mm0.197–0.591 in

Wire, Profile · Adjustable rolls

5.0–15.0 mm0.197–0.591 inWire, ProfileAdjustable rolls

Selection help

Not sure which model fits your line?

Send your material, diameter, and throughput. Our team in Branford, CT works with Witels-Albert in Germany to specify the right configuration.