wire straighteners, feeders, guides and accessories

Oxford, MD 21654 USA
Phone: 410.228.8383
Fax: 410-228-1813

Exclusive stocking office for North, South and Central America


Experimentation has resulted in the following formula to determine the distance between the spool, coil, or the position of the last direction change and the straightener:

A < π x d (see figure 7 and 8)



Any straightening process is concerned with initial curvature, reverse curvature, and residual curvature. Reverse curvature is applied via the second roll in the opposite mode to the spool, coil, or guide which is responsible for the initial curvature. The residual curvature is progressively removed until the required final value has been achieved. In principle, this is a parallel axis process whether it relates to spool-straightening or straightening-spooling. Repetition in various planes is suggested.


With a small number of rolls, the reverse curvature is severe, the taper angle is large (see figure 9), and the straightening process is generally aggressive. High tensile materials can not be straightened in this way. With such materials, the straightening process must be spread over a greater number of rolls (see figure 10). The required straightness is achieved by first submitting the material to be straightened to severe reverse curvature and, thereafter, to progressively gentler treatment (see figure 11).


Avoiding dirty conditions, particularly from metal particle contamination, and proper roll fit have a significant influence on the life of straightening rolls. Under highly clean conditions your WITELS straightening rolls can achieve a life-time of up to 30 times  the norm. Improved WITELS straightening systems such as the WICAS cartridge system are designed specifically to prevent contamination from dirt and metal particles.roll5

When fitting straightening rolls, always ensure that pressure is applied correctly so that bearing balls and races are not damaged. Always “seat” the inner-ring of the bearing by applying pressure evenly over its front facing surface. A press or similar tool should be used for this purpose (see figure 12).


Witels Albert supplies a variety of straightener accessories for ease of set-up and “repeatability” of settings. For example: quick opening/closing options, roller position indicators, locking levers, entry/exit guide pulleys, guide dies, micrometer adjustment, guards, and Witels Albert proprietary software packages that allow for automatic or semi-automatic positioning of rollers and other components.

In addition, our wide range of range of raw material handling products includes wire straighteners, tube straighteners, wire guides, tube guides, tube feeders and wire feeders or drive units, cable straighteners, strip straighteners, flatwire straighteners, custom built feeding machines, straightening rolls , preformers or preform heads , sleeve rolls for high speed and high temperature applications, computerized wire straightener and tube straightener adjustment systems, and Witels Albert proprietary software packages that allow for automatic or semi-automatic positioning of rollers and other components.

WITELS ALBERT USA - 208 E. Pier St. - Oxford, MD 21654 - Phone 1-410-228-8383 - Fax 1-410-228-1813 - info@witels-albert-usa.com